Static Cling Vinyl

Non Top-Coated Static Cling Vinyl

General Description: Non Top-Coated Static Cling Vinyl can be removed and re-applied, removes cleanly and leaves no adhesive residue. A highly plasticized, calendared, flexible, adhesive-free PVC film laminated to a release liner. Plasticling Static Cling Vinyl clings tightly to most clean polished surfaces.

Product Description: The film is available in thicknesses of 6,7 & 8 mils. Available in clear & white. Other thicknesses and colors available upon special request (minimum quantities may apply). Thickness tolerance: +/- 10%. Dimensional stability: - 3% (50° C x 10 minutes). White, Kromekote liners are available in standard 70#, 90#, 112# (8pt.) and 125# (10pt.) thickness. Other liner colors, types and thicknesses available upon request (minimum quantities may apply). Recommendation: 60 Day printable shelf life from the day it leaves Plastiprint’s dock (Shelf life can be longer depending on climate control.)

Vinyls:

6-mil standard vinyl: 6-mil vinyl has slightly better adhesion than 7 or 8mil vinyl, but with slightly more apparent flow lines (optical distortion). Good for price sensitive applications and where longer rolls are desirable while limiting weight and roll diameter. Available in clear & white.

7-mil standard vinyl: Considered the industry standard, available in clear only.

90# Kromekote liner: Designed for Roll Fed & Roll to Sheet applications that need sheeting after printing.

112# (8pt.) Kromekote liner: 112# white, Kromekote paper board liner with printable backside. Good lay-flat and economy for applications with limited ink coverage.

125# (10pt.) Kromekote Liner: 125# white, Kromekote paper board liner with printable backside is considered the industry standard thickness. The 125# liner offers best lay flat and stiffness for heavy ink coverage and high speed sheet feeding.

Print Applications: Non top-coated Static cling vinyl is suitable for printing with most screen printing ink systems, Solvent & Eco Solvent Digital Ink Jet, UV Curable printing, HP LATEX solvent printer, UV offset lithography and UV flexography.

Rolls and sheets come out of a 54” wide master roll stock

Application Temperature: 32°F / 0°C – 95°F / 35°C

Service Temperature: 0°F / -18°C – 150°F / 66°C

FOR YOUR PROTECTION: Customers/users assume all risks resulting from the use of our products and must confirm the suitability thereof by their own tests. The information and recommendations contained in this publication are, to the best of our knowledge, reliable. Suggestions made concerning uses or applications are only the opinion of Plastiprint. They are provided as a guide only and shall in no event constitute a warranty of any kind. Our liability will in no event exceed the dollar value of the material sold. Plastiprint reserves the right to change or improve product specifications or performance at any time. Plastiprint reserves the right to change pricing at any time without notice.